Mechlovin' 9

TECHNICAL SPECIFICATIONS

  • PCB is programmable with QMK and VIA

  • Compatible with the Kyuu 65% by Quantrik

  • PCB thickness: 1.6mm

  • Connection: USB-C, Onboard

  • Powered by STM32F303 MCU (Rev. 1) or Atmega32A (Rev. 2)

  • Supported layout

  • Underglow RGB: N/A

  • ESD protection

  • Hardware reset: yes

  • PCB colour: Matte black

FIRMWARE FLASHING GUIDE

  • To put the PCB into DFU, hold ESC key then plug in the cable OR locating the reset button/ pads as picture

  • Firmware download:

REV.1 (STM32 MCU)

REV.2 (Atmega32A MCU) - Right Click "Raw" and Save Link As

NOTES

  • Due to the fact that it’s a 65% PCB with centered USB-C connector, the 9 MIGHT fit certain cases that utilise a similar design. However, due to the non-standard stabs orientations which may lead to incompatibility with other 65% switchplates, we DO NOT recommend using the 9 for any other boards apart from the Kyuu.